diff --git a/FS25_ADSmartPickup/adFieldJobs.lua b/FS25_ADSmartPickup/adFieldJobs.lua
index 334f946..156849f 100644
--- a/FS25_ADSmartPickup/adFieldJobs.lua
+++ b/FS25_ADSmartPickup/adFieldJobs.lua
@@ -91,6 +91,10 @@ local function note(fieldId, changes)
     setField(ADFieldModel.with(ADFieldJobs.getField(fieldId), changes))
 end
 
+function ADFieldJobs.forceReady(id)
+    setField(ADFieldModel.forceReady(ADFieldJobs.getField(id)))
+end
+
 function ADFieldJobs.toggleFleet(vehicleId)
     ADFieldJobs.state.fleet = ADFieldFleet.toggle(ADFieldJobs.state.fleet, vehicleId)
     ADFieldJobs.save()
diff --git a/FS25_ADSmartPickup/adFieldModel.lua b/FS25_ADSmartPickup/adFieldModel.lua
index 1afdeb7..5d12a57 100644
--- a/FS25_ADSmartPickup/adFieldModel.lua
+++ b/FS25_ADSmartPickup/adFieldModel.lua
@@ -77,6 +77,14 @@ function ADFieldModel.shouldStart(field)
     return field.stage == "ready" and (field.plan.mode == "auto" or field.startRequested == true)
 end
 
+-- Start nu fra menuen på en mark der ikke er nået 90 %: den behandles som klar.
+function ADFieldModel.forceReady(field)
+    if field.stage == "idle" or field.stage == "done" then
+        return ADFieldModel.with(field, {stage = "ready"})
+    end
+    return field
+end
+
 function ADFieldModel.start(field)
     local copy = copyField(field)
     copy.stage = ADFieldModel.workStages(field.plan)[1]
diff --git a/FS25_ADSmartPickup/adSmartPickup.lua b/FS25_ADSmartPickup/adSmartPickup.lua
index c9e1108..f312591 100644
--- a/FS25_ADSmartPickup/adSmartPickup.lua
+++ b/FS25_ADSmartPickup/adSmartPickup.lua
@@ -17,6 +17,7 @@ if ADSmartPickup.dir ~= nil and source ~= nil then
     source(ADSmartPickup.dir .. "gui/SmartPickupOutboundTab.lua")
     source(ADSmartPickup.dir .. "gui/SmartPickupStorageTab.lua")
     source(ADSmartPickup.dir .. "gui/SmartPickupFlowTab.lua")
+    source(ADSmartPickup.dir .. "gui/SmartPickupFieldTab.lua")
 end
 
 -- Markøren er dér hvor trækkerens næse stopper; læssetriggeren ligger et
diff --git a/FS25_ADSmartPickup/gui/SmartPickupFieldTab.lua b/FS25_ADSmartPickup/gui/SmartPickupFieldTab.lua
new file mode 100644
index 0000000..2c6b5d0
--- /dev/null
+++ b/FS25_ADSmartPickup/gui/SmartPickupFieldTab.lua
@@ -0,0 +1,254 @@
+-- Smart Pickup — fanen Marker
+-- Tabel over gårdens slåafgrøde-marker (Mark · Afgrøde · Plan · Auto/Man. · Status · Maskiner); klik på
+-- en række viser markens detaljer under tabellen (plan, kørsel, riv, tving lager, marksiloer). Nederst
+-- markflåden: foreslåede sæt med flueben. Al logik ligger i ADFieldJobs/ADFieldModel/ADFieldView.
+-- Funktionerne lægges på SmartPickupFrame (indlæses efter SmartPickupFrame.lua).
+
+SmartPickupFrame.FIELD_ROW_KINDS = {
+    showAllFields = true, fieldProduct = true, fieldMode = true, fieldRake = true, fieldStore = true, fleetVehicle = true,
+}
+SmartPickupFrame.ROLE_KEYS = {mower = "spu_field_role_mower", tedder = "spu_field_role_tedder", rake = "spu_field_role_rake", collector = "spu_field_role_collector"}
+
+-- ---- tekster ----
+
+function SmartPickupFrame:fieldReasonText(reason)
+    if type(reason) ~= "table" then return nil end
+    if reason.text ~= nil then return reason.text end
+    local role = reason.role ~= nil and self.i18n:getText(SmartPickupFrame.ROLE_KEYS[reason.role] or "spu_field_role_mower") or ""
+    local template = self.i18n:getText(reason.key)
+    local args = reason.args or {}
+    local ok, text = pcall(string.format, template, role, args[1] or 0, args[2] or 0)
+    return ok and text or template
+end
+
+function SmartPickupFrame:fieldStatusText(field, info)
+    local text = self.i18n:getText(ADFieldView.statusKey(field, info))
+    if info.markerId == nil then
+        return string.format(text, info.id)
+    end
+    if (field.stage == "idle" or field.stage == "ready") and info.mowable then
+        text = string.format("%s %d %%", text, math.floor((info.readyRatio or 0) * 100 + 0.5))
+    end
+    local reason = self:fieldReasonText(field.reason)
+    if reason ~= nil then text = text .. ": " .. reason end
+    return text
+end
+
+function SmartPickupFrame:fieldPlanText(field)
+    local text = self.i18n:getText(field.plan.product == "hay" and "spu_field_plan_hay" or "spu_field_plan_silage")
+    if field.plan.product == "hay" and field.plan.rake then
+        text = text .. " + " .. self.i18n:getText("spu_field_plan_rake")
+    end
+    return text
+end
+
+function SmartPickupFrame:fieldCells(row)
+    local info, field = row.info, row.field
+    local names = {}
+    for _, assignment in ipairs(ADFieldJobs.assignmentsFor(info.id)) do
+        table.insert(names, ADRuns.vehicleLabel(assignment.vehicle))
+    end
+    local name = string.format("%s%sF%d", info.id == self.selectedFieldId and "> " or "", info.markerId == nil and "! " or "", info.id)
+    return {
+        name, info.cropTitle or "-", info.mowable and self:fieldPlanText(field) or "-",
+        self.i18n:getText(field.plan.mode == "auto" and "spu_field_mode_auto" or "spu_field_mode_manual"),
+        info.mowable and self:fieldStatusText(field, info) or self.i18n:getText("spu_field_notMowable"),
+        ADFlowView.joinCounted(names, ", ", "-"),
+    }
+end
+
+-- ---- opbygning ----
+
+function SmartPickupFrame:fillFieldRows(adEnv)
+    self.fieldRows = {}
+    local i18n = self.i18n
+    local infos = ADFields.list()
+    if #infos == 0 then
+        self:addTextRow(i18n:getText("spu_field_scanning"))
+    else
+        self:addTextRow(i18n:getText("spu_field_hint"))
+        local hidden = ADFieldView.hiddenCount(infos, self.showAllFields == true)
+        if hidden > 0 or self.showAllFields then
+            self:addToggleRow("showAllFields", string.format(i18n:getText("spu_field_showAll"), hidden), {i18n:getText("ui_no"), i18n:getText("ui_yes")}, self.showAllFields == true)
+        end
+        self:addCellRow(self.fieldPrefab, {i18n:getText("spu_col_field"), i18n:getText("spu_col_crop"), i18n:getText("spu_col_plan"), i18n:getText("spu_col_mode"), i18n:getText("spu_col_status"), i18n:getText("spu_col_tractors")})
+        for _, row in ipairs(ADFieldView.rows(infos, ADFieldJobs.state.fields, self.showAllFields == true)) do
+            local cells = self:addCellRow(self.fieldPrefab, self:fieldCells(row))
+            local fieldId = row.info.id
+            if cells[1] ~= nil and cells[1].parent ~= nil then
+                self:makeRowClickable(cells[1].parent, function(frame)
+                    frame.selectedFieldId = fieldId
+                    frame:requestRebuild()
+                end)
+            end
+            table.insert(self.fieldRows, {id = fieldId, cells = cells})
+        end
+    end
+    local selected = self.selectedFieldId ~= nil and ADFields.getInfo(self.selectedFieldId) or nil
+    if selected ~= nil then
+        self:fillFieldDetail(adEnv, selected)
+    end
+    self:fillFleetRows(adEnv)
+end
+
+function SmartPickupFrame:fillFieldDetail(adEnv, info)
+    local i18n = self.i18n
+    local field = ADFieldJobs.getField(info.id)
+    self:addTextRow(string.format(i18n:getText("spu_field_section"), info.id, tostring(info.cropTitle or "-")))
+    if not info.mowable then
+        self:addTextRow("    " .. i18n:getText("spu_field_notMowable"))
+        return
+    end
+    local isHay = field.plan.product == "hay"
+    self:addToggleRow("fieldProduct", i18n:getText("spu_field_plan"), {i18n:getText("spu_field_plan_silage"), i18n:getText("spu_field_plan_hay")}, isHay)
+    self:addToggleRow("fieldMode", i18n:getText("spu_field_mode"), {i18n:getText("spu_field_mode_manual"), i18n:getText("spu_field_mode_auto")}, field.plan.mode == "auto")
+    if isHay then
+        self:addToggleRow("fieldRake", i18n:getText("spu_field_rake"), {i18n:getText("ui_no"), i18n:getText("ui_yes")}, field.plan.rake == true)
+    end
+    if info.markerId ~= nil then
+        self:addTextRow(string.format(i18n:getText("spu_field_marker"), tostring(info.markerName), info.markerDistance or 0))
+    else
+        self:addTextRow("    " .. string.format(i18n:getText("spu_field_noMarker"), info.id))
+    end
+    if field.mowWidth ~= nil then
+        self:addTextRow(string.format(i18n:getText("spu_field_mowWidth"), field.mowWidth))
+    end
+    self:fillFieldStoreRows(adEnv, info, field)
+end
+
+-- Tving lager: siloer der tager markens vare (skår ved ensilage, tørskår ved hø); valgte først.
+function SmartPickupFrame:fillFieldStoreRows(adEnv, info, field)
+    local i18n = self.i18n
+    self:addTextRow(i18n:getText("spu_field_section_store"))
+    local fillType = field.plan.product == "hay" and info.hay or info.windrow
+    local chosen = {}
+    for _, id in ipairs(field.plan.storeBuildingIds) do chosen[id] = true end
+    local farmId = g_currentMission:getFarmId()
+    local fieldSilos = {}
+    for _, building in ipairs(ADFields.fieldSilos(adEnv, farmId, info)) do fieldSilos[building.id] = building end
+    local count = 0
+    for _, building in ipairs(ADBuildings.list(adEnv, farmId)) do
+        if building.kind == "silo" and (chosen[building.id] or ADRunsController.canStoreAt(adEnv, building, {{fillType = fillType, isPallet = false}})) then
+            count = count + 1
+            local row = self:addRow(self.ingredientPrefab, {kind = "fieldStore", buildingId = building.id})
+            local suffix = fieldSilos[building.id] ~= nil and (" (" .. i18n:getText("spu_field_fieldSilo") .. ")") or ""
+            row:getDescendantByName("title"):setText("    " .. tostring(building.name) .. suffix)
+            row:getDescendantByName("option"):setState(chosen[building.id] and SmartPickupFrame.STATE_ON or SmartPickupFrame.STATE_OFF, false)
+        end
+    end
+    if count == 0 then
+        self:addTextRow("    " .. i18n:getText("spu_field_noStore"))
+    elseif #field.plan.storeBuildingIds == 0 then
+        self:addTextRow("    " .. i18n:getText("spu_field_storeAuto"))
+    end
+    -- marksiloer skal tømmes hjem af et udkørselsflow
+    for id, building in pairs(fieldSilos) do
+        local emptied = false
+        for _, run in ipairs(ADRunsController.store.runs) do
+            for _, sourceId in ipairs(run.kind == "outbound" and run.sourceBuildingIds or {}) do
+                if sourceId == id then emptied = true end
+            end
+        end
+        if not emptied then
+            self:addTextRow("    " .. string.format(i18n:getText("spu_field_fieldSiloNotEmptied"), tostring(building.name)))
+        end
+    end
+end
+
+function SmartPickupFrame:fillFleetRows(adEnv)
+    local i18n = self.i18n
+    self:addTextRow(i18n:getText("spu_field_section_fleet"))
+    local rigs = ADFieldJobs.getRigs(adEnv)
+    table.sort(rigs, function(a, b)
+        if a.role ~= b.role then return a.role < b.role end
+        return ADFlowView.naturalLess(a.label, b.label)
+    end)
+    for _, rig in ipairs(rigs) do
+        local row = self:addRow(self.vehiclePrefab, {kind = "fleetVehicle", vehicleId = rig.id})
+        local title = string.format("    %s — %s, %.1f m", tostring(rig.label), i18n:getText(SmartPickupFrame.ROLE_KEYS[rig.role]), rig.width or 0)
+        if (rig.width or 0) > ADFieldModel.CP_MAX_WIDTH then
+            title = title .. " — " .. i18n:getText("spu_field_tooWideShort")
+        end
+        local assignment = ADFieldJobs.state.assignments[rig.id]
+        if assignment ~= nil then
+            title = title .. string.format(" — F%d", assignment.fieldId)
+        end
+        row:getDescendantByName("title"):setText(title)
+        row:getDescendantByName("option"):setState(rig.enabled and SmartPickupFrame.STATE_ON or SmartPickupFrame.STATE_OFF, false)
+    end
+    if #rigs == 0 then
+        self:addTextRow("    " .. i18n:getText("spu_field_noRigs"))
+    end
+end
+
+-- ---- live ----
+
+function SmartPickupFrame:refreshFieldRows(adEnv)
+    local rowsById = {}
+    for _, row in ipairs(ADFieldView.rows(ADFields.list(), ADFieldJobs.state.fields, true)) do rowsById[row.info.id] = row end
+    local working, total = 0, 0
+    for _, entry in ipairs(self.fieldRows or {}) do
+        local row = rowsById[entry.id]
+        if row ~= nil then
+            SmartPickupFrame.setCells(entry.cells, self:fieldCells(row))
+            if row.info.mowable then total = total + 1 end
+            if ADFieldModel.isWorking(row.field) then working = working + 1 end
+        end
+    end
+    self:setStatusText(self.statusOverride or string.format(self.i18n:getText("spu_field_status"), working, total))
+    local selected = self.selectedFieldId ~= nil and ADFieldJobs.getField(self.selectedFieldId) or nil
+    local info = self.selectedFieldId ~= nil and ADFields.getInfo(self.selectedFieldId) or nil
+    local isWorking = selected ~= nil and ADFieldModel.isWorking(selected)
+    self.fieldStartButtonInfo.text = self.i18n:getText(isWorking and "spu_field_button_stop" or "spu_field_button_start")
+    self.fieldStartButtonInfo.disabled = selected == nil or info == nil or not info.mowable
+        or (not isWorking and (info.markerId == nil or (info.readyRatio or 0) < ADFieldModel.CUT_RATIO))
+end
+
+-- ---- klik ----
+
+function SmartPickupFrame:onClickFieldRow(state, data)
+    self:safe(function(frame)
+        local isOn = state == SmartPickupFrame.STATE_ON
+        local id = frame.selectedFieldId
+        if data.kind == "showAllFields" then
+            frame.showAllFields = isOn
+        elseif data.kind == "fleetVehicle" then
+            ADFieldJobs.toggleFleet(data.vehicleId)
+        elseif id == nil then
+            return
+        elseif data.kind == "fieldProduct" then
+            ADFieldJobs.setPlan(id, {product = isOn and "hay" or "silage"})
+        elseif data.kind == "fieldMode" then
+            ADFieldJobs.setPlan(id, {mode = isOn and "auto" or "manual"})
+        elseif data.kind == "fieldRake" then
+            ADFieldJobs.setPlan(id, {rake = isOn})
+        elseif data.kind == "fieldStore" then
+            local ids = {}
+            for _, buildingId in ipairs(ADFieldJobs.getField(id).plan.storeBuildingIds) do
+                if buildingId ~= data.buildingId then table.insert(ids, buildingId) end
+            end
+            if isOn then table.insert(ids, data.buildingId) end
+            ADFieldJobs.setPlan(id, {storeBuildingIds = ids})
+        end
+        frame:requestRebuild()
+    end)
+end
+
+function SmartPickupFrame:onClickFieldStartStop()
+    self:safe(function(frame)
+        local id = frame.selectedFieldId
+        if id == nil then return end
+        local field = ADFieldJobs.getField(id)
+        if ADFieldModel.isWorking(field) then
+            ADFieldJobs.stopField(frame.getAdEnv(), id)
+        else
+            if field.stage ~= "ready" then
+                ADFieldJobs.forceReady(id)
+            end
+            ADFieldJobs.requestStart(id)
+            frame.statusOverride = string.format(frame.i18n:getText("spu_field_startRequested"), id)
+            frame.statusOverrideTicks = SmartPickupFrame.STATUS_OVERRIDE_TICKS
+        end
+        frame:requestRebuild()
+    end)
+end
diff --git a/FS25_ADSmartPickup/gui/SmartPickupFlowTab.lua b/FS25_ADSmartPickup/gui/SmartPickupFlowTab.lua
index dd493b2..4d3ad52 100644
--- a/FS25_ADSmartPickup/gui/SmartPickupFlowTab.lua
+++ b/FS25_ADSmartPickup/gui/SmartPickupFlowTab.lua
@@ -65,7 +65,7 @@ function SmartPickupFrame:flowCells(adEnv, run)
 end
 
 -- Hele rækken klikbar med musen (Bitmap-rækker har ingen onClick). Klikket gemmes kun som
--- pendingJumpRunId; hoppet sker i update(), fordi genopbygningen sletter netop denne række.
+-- pendingClick; handlingen køres i update(), fordi genopbygningen sletter netop denne række.
 local MOUSE_LEFT = Input ~= nil and Input.MOUSE_BUTTON_LEFT or 1
 
 local function isInside(element, posX, posY)
@@ -74,7 +74,7 @@ local function isInside(element, posX, posY)
     return posX >= position[1] and posX <= position[1] + size[1] and posY >= position[2] and posY <= position[2] + size[2]
 end
 
-function SmartPickupFrame:makeRowClickable(row, runId)
+function SmartPickupFrame:makeRowClickable(row, action)
     local frame = self
     local baseMouseEvent = row.mouseEvent
     row.mouseEvent = function(element, posX, posY, isDown, isUp, button, eventUsed)
@@ -82,7 +82,7 @@ function SmartPickupFrame:makeRowClickable(row, runId)
         -- også inden for listens synlige udsnit: rækker scrollet ud af syne må ikke fange klik
         if not used and not eventUsed and isUp and button == MOUSE_LEFT and (element.getIsVisible == nil or element:getIsVisible())
             and isInside(element, posX, posY) and isInside(frame.boxLayout, posX, posY) then
-            frame.pendingJumpRunId = runId
+            frame.pendingClick = action
             return true
         end
         return used
@@ -100,7 +100,8 @@ function SmartPickupFrame:fillOverviewRows(adEnv)
         for _, run in ipairs(group.runs) do
             local cells = self:addCellRow(self.flowPrefab, self:flowCells(adEnv, run))
             if cells[1] ~= nil and cells[1].parent ~= nil then
-                self:makeRowClickable(cells[1].parent, run.id)
+                local runId = run.id
+                self:makeRowClickable(cells[1].parent, function(frame) frame:openFlow(runId) end)
             end
             table.insert(self.overviewRows, {runId = run.id, cells = cells})
         end
diff --git a/FS25_ADSmartPickup/gui/SmartPickupFrame.lua b/FS25_ADSmartPickup/gui/SmartPickupFrame.lua
index d829a0b..dfafc55 100644
--- a/FS25_ADSmartPickup/gui/SmartPickupFrame.lua
+++ b/FS25_ADSmartPickup/gui/SmartPickupFrame.lua
@@ -11,10 +11,10 @@ SmartPickupFrame.STATUS_OVERRIDE_TICKS = 6
 SmartPickupFrame.MAX_STATUS_REASONS = 3
 SmartPickupFrame.LOG_PREFIX = "ADSmartPickup: "
 SmartPickupFrame.STATE_OFF, SmartPickupFrame.STATE_ON = 1, 2
-SmartPickupFrame.TAB_OVERVIEW, SmartPickupFrame.TAB_FLOWS = 1, 2
+SmartPickupFrame.TAB_OVERVIEW, SmartPickupFrame.TAB_FLOWS, SmartPickupFrame.TAB_FIELDS = 1, 2, 3
 -- Lagerfaner: én pr. bygningstype (indeks -> kind i ADSources.getFarmInventory)
-SmartPickupFrame.TAB_NAMES = {"spu_tab_overview", "spu_tab_flows", "spu_tab_factories", "spu_tab_silos", "spu_tab_barns", "spu_tab_sheds"}
-SmartPickupFrame.TAB_KINDS = {[3] = "factory", [4] = "silo", [5] = "husbandry", [6] = "objectStorage"}
+SmartPickupFrame.TAB_NAMES = {"spu_tab_overview", "spu_tab_flows", "spu_tab_fields", "spu_tab_factories", "spu_tab_silos", "spu_tab_barns", "spu_tab_sheds"}
+SmartPickupFrame.TAB_KINDS = {[4] = "factory", [5] = "silo", [6] = "husbandry", [7] = "objectStorage"}
 
 function SmartPickupFrame.getTabKind(tab)
     return SmartPickupFrame.TAB_KINDS[tab]
@@ -51,6 +51,9 @@ function SmartPickupFrame.new(i18n, getAdEnv)
     self.stopAllButtonInfo = {inputAction = InputAction.MENU_EXTRA_2, text = i18n:getText("spu_button_stopAll"), callback = function() self:onClickStopAll() end}
     self.flowButtons = {self.backButtonInfo, self.startButtonInfo, self.newButtonInfo, self.renameButtonInfo, self.deleteButtonInfo}
     self.overviewButtons = {self.backButtonInfo, self.startAllButtonInfo, self.stopAllButtonInfo, self.newButtonInfo}
+    -- Marker: Start nu / Stop for den valgte mark
+    self.fieldStartButtonInfo = {inputAction = InputAction.MENU_ACTIVATE, text = i18n:getText("spu_field_button_start"), callback = function() self:onClickFieldStartStop() end}
+    self.fieldButtons = {self.backButtonInfo, self.fieldStartButtonInfo}
     -- Egen reference til listen: fallback'en i refreshButtons skal kunne sende den igen.
     self.menuButtonInfo = self.overviewButtons
     self:setMenuButtonInfo(self.menuButtonInfo)
@@ -68,7 +71,7 @@ end
 
 -- Prefabs skal ud af layoutet før de klones, ellers vises de selv som rækker.
 function SmartPickupFrame:initialize()
-    for _, name in ipairs({"ingredientPrefab", "vehiclePrefab", "textPrefab", "productPrefab", "statPrefab", "gridPrefab", "flowPrefab"}) do
+    for _, name in ipairs({"ingredientPrefab", "vehiclePrefab", "textPrefab", "productPrefab", "statPrefab", "gridPrefab", "flowPrefab", "fieldPrefab"}) do
         local prefab = self[name]
         if prefab ~= nil then
             prefab:unlinkElement()
@@ -201,10 +204,10 @@ end
 -- dets egen klik-håndtering, hopper værdien frem og tilbage og fokus ryger.
 function SmartPickupFrame:update(dt)
     SmartPickupFrame:superClass().update(self, dt)
-    if self.pendingJumpRunId ~= nil then
-        local runId = self.pendingJumpRunId
-        self.pendingJumpRunId = nil
-        self:safe(function(frame) frame:openFlow(runId) end)
+    if self.pendingClick ~= nil then
+        local action = self.pendingClick
+        self.pendingClick = nil
+        self:safe(action)
     elseif self.pendingRebuild then
         self.pendingRebuild = false
         self:safe(self.rebuild)
@@ -380,6 +383,17 @@ function SmartPickupFrame:rebuild()
         self:refreshLive()
         return
     end
+    if self.currentTab == SmartPickupFrame.TAB_FIELDS then
+        if adEnv ~= nil then
+            self:fillFieldRows(adEnv)
+        end
+        self.statusRow = self:addTextRow("")
+        self:colorRows()
+        self.boxLayout:invalidateLayout()
+        self:refreshLive()
+        self:restoreFocusIfLost()
+        return
+    end
     if self.currentTab == SmartPickupFrame.TAB_OVERVIEW then
         if adEnv ~= nil then
             self:fillOverviewRows(adEnv)
@@ -642,7 +656,12 @@ end
 -- setMenuButtonInfoDirty findes i FS22/25's TabbedMenuFrameElement; mangler den,
 -- sendes listen igen. Kaldes hvert sekund, så den må aldrig kaste.
 function SmartPickupFrame:refreshButtons()
-    local wanted = self.currentTab == SmartPickupFrame.TAB_OVERVIEW and self.overviewButtons or self.flowButtons
+    local wanted = self.flowButtons
+    if self.currentTab == SmartPickupFrame.TAB_OVERVIEW then
+        wanted = self.overviewButtons
+    elseif self.currentTab == SmartPickupFrame.TAB_FIELDS then
+        wanted = self.fieldButtons
+    end
     if self.menuButtonInfo ~= wanted then
         self.menuButtonInfo = wanted
         self:setMenuButtonInfo(wanted)
@@ -666,6 +685,13 @@ function SmartPickupFrame:refreshLive()
     if isOverview then
         self:refreshOverview(adEnv)
     end
+    if self.currentTab == SmartPickupFrame.TAB_FIELDS then
+        self:refreshFieldRows(adEnv)
+        self.statusOverrideTicks = (self.statusOverrideTicks or 0) - 1
+        if self.statusOverrideTicks <= 0 then self.statusOverride = nil end
+        self:refreshButtons()
+        return
+    end
     self:refreshStorageRows(adEnv)
     local isRunning = false
     if isOverview then
@@ -738,6 +764,8 @@ function SmartPickupFrame:onClickIngredient(state, element)
         if data.kind == "showAllVehicles" then self.showAllVehicles = isOn else self.showAllBuildings = isOn end
         self:requestRebuild()
         return
+    elseif data ~= nil and SmartPickupFrame.FIELD_ROW_KINDS[data.kind] then
+        return self:onClickFieldRow(state, data)
     elseif data ~= nil and (data.kind == "sourceBuilding" or data.kind == "targetBuilding" or data.kind == "storeBuilding") then
         return self:onClickBuilding(state, element)
     end
@@ -764,6 +792,10 @@ function SmartPickupFrame:onClickWaitPool(state)
 end
 
 function SmartPickupFrame:onClickVehicle(state, element)
+    local clicked = self.rowData[element]
+    if clicked ~= nil and clicked.kind == "fleetVehicle" then
+        return self:onClickFieldRow(state, clicked)
+    end
     self:safe(function(frame)
         local run, data = frame:getRun(), frame.rowData[element]
         if run == nil or data == nil or data.locked then return end
diff --git a/FS25_ADSmartPickup/gui/SmartPickupFrame.xml b/FS25_ADSmartPickup/gui/SmartPickupFrame.xml
index 0a13383..85d8da5 100644
--- a/FS25_ADSmartPickup/gui/SmartPickupFrame.xml
+++ b/FS25_ADSmartPickup/gui/SmartPickupFrame.xml
@@ -81,6 +81,15 @@
             <Text profile="spuCell" name="c5" position="620px 0px" size="50px 40px" textMaxWidth="42px"/>
             <Text profile="spuCell" name="c6" position="670px 0px" size="140px 40px" textMaxWidth="132px"/>
         </Bitmap>
+        <!-- Marker: én række pr. mark (mark · afgrøde · plan · auto/man. · status · maskiner). Rækken er ~815 px bred. -->
+        <Bitmap profile="fs25_multiTextOptionContainer" id="fieldPrefab">
+            <Text profile="spuCellBold" name="c1" position="20px 0px" size="100px 40px" textMaxWidth="92px"/>
+            <Text profile="spuCell" name="c2" position="120px 0px" size="130px 40px" textMaxWidth="122px"/>
+            <Text profile="spuCell" name="c3" position="250px 0px" size="110px 40px" textMaxWidth="102px"/>
+            <Text profile="spuCell" name="c4" position="360px 0px" size="80px 40px" textMaxWidth="72px"/>
+            <Text profile="spuCell" name="c5" position="440px 0px" size="230px 40px" textMaxWidth="222px"/>
+            <Text profile="spuCell" name="c6" position="670px 0px" size="140px 40px" textMaxWidth="132px"/>
+        </Bitmap>
         <!-- Lagre: statistik-tabel (vare · i bygningen · værdi nu · ved toppris · gården · rækker til · forbrug/prod.) -->
         <Bitmap profile="fs25_multiTextOptionContainer" id="statPrefab">
             <Text profile="spuCellBold" name="c1" position="20px 0px" size="140px 40px" textMaxWidth="132px"/>
diff --git a/FS25_ADSmartPickup/l10n/l10n_da.xml b/FS25_ADSmartPickup/l10n/l10n_da.xml
index f341903..69882ec 100644
--- a/FS25_ADSmartPickup/l10n/l10n_da.xml
+++ b/FS25_ADSmartPickup/l10n/l10n_da.xml
@@ -39,6 +39,54 @@
         <text name="spu_status_startedAll" text="Startet %d flows (%d traktorer), %d kørte allerede, %d sprunget over"/>
         <text name="spu_status_stoppedAll" text="Stoppet %d traktorer"/>
         <text name="spu_overview_hint" text="Klik på et flow for at redigere det"/>
+        <text name="spu_tab_fields" text="Marker"/>
+        <text name="spu_field_button_start" text="Start nu"/>
+        <text name="spu_field_button_stop" text="Stop mark"/>
+        <text name="spu_field_noMarker" text="! mangler markør F%d"/>
+        <text name="spu_field_stage_idle" text="Venter"/>
+        <text name="spu_field_stage_ready" text="Klar"/>
+        <text name="spu_field_stage_mowing" text="Slås"/>
+        <text name="spu_field_stage_tedding" text="Vendes"/>
+        <text name="spu_field_stage_raking" text="Rives"/>
+        <text name="spu_field_stage_collecting" text="Samles op"/>
+        <text name="spu_field_stage_done" text="Færdig"/>
+        <text name="spu_field_reason_noRig" text="ingen %s med flueben i markflåden"/>
+        <text name="spu_field_reason_allBusy" text="venter på ledig %s"/>
+        <text name="spu_field_reason_tooWide" text="%s for bred: %.1f m &gt; %.0f m (Courseplay)"/>
+        <text name="spu_field_reason_tooNarrow" text="%s for smal: %.1f m &lt; slåbredde %.1f m"/>
+        <text name="spu_field_role_mower" text="slåmaskine"/>
+        <text name="spu_field_role_tedder" text="vender"/>
+        <text name="spu_field_role_rake" text="river"/>
+        <text name="spu_field_role_collector" text="læssevogn"/>
+        <text name="spu_field_plan_silage" text="Ensilage"/>
+        <text name="spu_field_plan_hay" text="Hø"/>
+        <text name="spu_field_plan_rake" text="riv"/>
+        <text name="spu_field_mode_auto" text="Auto"/>
+        <text name="spu_field_mode_manual" text="Manuel"/>
+        <text name="spu_field_notMowable" text="ikke græs/kløver"/>
+        <text name="spu_field_scanning" text="Marker indlæses ... (én mark pr. sekund)"/>
+        <text name="spu_field_hint" text="Klik på en mark for at vælge den. Sæt flueben ved maskinerne i markflåden nederst."/>
+        <text name="spu_field_showAll" text="Vis alle marker (%d skjult)"/>
+        <text name="spu_col_field" text="Mark"/>
+        <text name="spu_col_crop" text="Afgrøde"/>
+        <text name="spu_col_plan" text="Plan"/>
+        <text name="spu_col_mode" text="Kørsel"/>
+        <text name="spu_field_section" text="— Mark F%d: %s —"/>
+        <text name="spu_field_plan" text="Plan"/>
+        <text name="spu_field_mode" text="Kørsel"/>
+        <text name="spu_field_rake" text="Riv høet sammen før opsamling"/>
+        <text name="spu_field_marker" text="    Markør %s, %.0f m fra marken"/>
+        <text name="spu_field_mowWidth" text="    Slået med %.1f m — opsamling skal være mindst lige så bred"/>
+        <text name="spu_field_section_store" text="— Tving lager (ellers nærmeste silo med plads) —"/>
+        <text name="spu_field_fieldSilo" text="marksilo"/>
+        <text name="spu_field_noStore" text="ingen silo tager markens vare"/>
+        <text name="spu_field_storeAuto" text="intet valgt: nærmeste silo med plads bruges"/>
+        <text name="spu_field_fieldSiloNotEmptied" text="! Marksilo %s tømmes ikke hjem — lav et Ud fra bygning-flow"/>
+        <text name="spu_field_section_fleet" text="— Markflåde (flueben = må sendes ud) —"/>
+        <text name="spu_field_tooWideShort" text="!! over 50 m"/>
+        <text name="spu_field_noRigs" text="ingen køretøjer med slåmaskine, vender, river eller læssevogn"/>
+        <text name="spu_field_status" text="Marker i gang: %d af %d"/>
+        <text name="spu_field_startRequested" text="F%d startes, når en maskine er ledig"/>
         <text name="spu_button_start" text="Start run"/>
         <text name="spu_button_stop" text="Stop run"/>
         <text name="spu_button_new" text="Nyt run"/>
diff --git a/FS25_ADSmartPickup/l10n/l10n_en.xml b/FS25_ADSmartPickup/l10n/l10n_en.xml
index 6ae257e..5567613 100644
--- a/FS25_ADSmartPickup/l10n/l10n_en.xml
+++ b/FS25_ADSmartPickup/l10n/l10n_en.xml
@@ -39,6 +39,54 @@
         <text name="spu_status_startedAll" text="Started %d flows (%d tractors), %d already running, %d skipped"/>
         <text name="spu_status_stoppedAll" text="Stopped %d tractors"/>
         <text name="spu_overview_hint" text="Click a flow to edit it"/>
+        <text name="spu_tab_fields" text="Fields"/>
+        <text name="spu_field_button_start" text="Start now"/>
+        <text name="spu_field_button_stop" text="Stop field"/>
+        <text name="spu_field_noMarker" text="! missing marker F%d"/>
+        <text name="spu_field_stage_idle" text="Waiting"/>
+        <text name="spu_field_stage_ready" text="Ready"/>
+        <text name="spu_field_stage_mowing" text="Mowing"/>
+        <text name="spu_field_stage_tedding" text="Tedding"/>
+        <text name="spu_field_stage_raking" text="Raking"/>
+        <text name="spu_field_stage_collecting" text="Collecting"/>
+        <text name="spu_field_stage_done" text="Done"/>
+        <text name="spu_field_reason_noRig" text="no %s ticked in the field fleet"/>
+        <text name="spu_field_reason_allBusy" text="waiting for a free %s"/>
+        <text name="spu_field_reason_tooWide" text="%s too wide: %.1f m &gt; %.0f m (Courseplay)"/>
+        <text name="spu_field_reason_tooNarrow" text="%s too narrow: %.1f m &lt; mowing width %.1f m"/>
+        <text name="spu_field_role_mower" text="mower"/>
+        <text name="spu_field_role_tedder" text="tedder"/>
+        <text name="spu_field_role_rake" text="rake"/>
+        <text name="spu_field_role_collector" text="loading wagon"/>
+        <text name="spu_field_plan_silage" text="Silage"/>
+        <text name="spu_field_plan_hay" text="Hay"/>
+        <text name="spu_field_plan_rake" text="rake"/>
+        <text name="spu_field_mode_auto" text="Auto"/>
+        <text name="spu_field_mode_manual" text="Manual"/>
+        <text name="spu_field_notMowable" text="not grass/clover"/>
+        <text name="spu_field_scanning" text="Loading fields ... (one field per second)"/>
+        <text name="spu_field_hint" text="Click a field to select it. Tick the machines in the field fleet at the bottom."/>
+        <text name="spu_field_showAll" text="Show all fields (%d hidden)"/>
+        <text name="spu_col_field" text="Field"/>
+        <text name="spu_col_crop" text="Crop"/>
+        <text name="spu_col_plan" text="Plan"/>
+        <text name="spu_col_mode" text="Mode"/>
+        <text name="spu_field_section" text="— Field F%d: %s —"/>
+        <text name="spu_field_plan" text="Plan"/>
+        <text name="spu_field_mode" text="Mode"/>
+        <text name="spu_field_rake" text="Rake the hay before collecting"/>
+        <text name="spu_field_marker" text="    Marker %s, %.0f m from the field"/>
+        <text name="spu_field_mowWidth" text="    Mowed at %.1f m — collecting must be at least as wide"/>
+        <text name="spu_field_section_store" text="— Force storage (else nearest silo with room) —"/>
+        <text name="spu_field_fieldSilo" text="field silo"/>
+        <text name="spu_field_noStore" text="no silo takes this field's goods"/>
+        <text name="spu_field_storeAuto" text="none chosen: nearest silo with room is used"/>
+        <text name="spu_field_fieldSiloNotEmptied" text="! Field silo %s is not emptied home — create an Out of building flow"/>
+        <text name="spu_field_section_fleet" text="— Field fleet (ticked = may be sent out) —"/>
+        <text name="spu_field_tooWideShort" text="!! over 50 m"/>
+        <text name="spu_field_noRigs" text="no vehicles with mower, tedder, rake or loading wagon"/>
+        <text name="spu_field_status" text="Fields in progress: %d of %d"/>
+        <text name="spu_field_startRequested" text="F%d starts when a machine is free"/>
         <text name="spu_button_start" text="Start run"/>
         <text name="spu_button_stop" text="Stop run"/>
         <text name="spu_button_new" text="New run"/>
diff --git a/tests/test_adFieldModel.lua b/tests/test_adFieldModel.lua
index 2737a70..aa9688a 100644
--- a/tests/test_adFieldModel.lua
+++ b/tests/test_adFieldModel.lua
@@ -95,5 +95,9 @@ check("M9 grund", noted.reason.text, "x"); check("M9 pause", noted.retryAt, 5)
 check("M9 plan flettet", noted.plan.product, "hay"); check("M9 mode bevaret", noted.plan.mode, "manual")
 check("M9 trin bevaret", noted.stage, "mowing"); check("M9 original urørt", base.plan.product, "silage")
 
+-- M10: Start nu på en mark der ikke er helt klar -> klar; arbejdende mark røres ikke
+check("M10 venter -> klar", M.forceReady(M.newField(2)).stage, "ready")
+check("M10 arbejdende uændret", M.forceReady(base).stage, "mowing")
+
 print(failures == 0 and "\nALLE TESTS OK" or ("\n" .. failures .. " FEJL"))
 os.exit(failures == 0 and 0 or 1)