- Update version in package.json to 2.0.6
- Add changelog entries for the latest fixes:
- Remote configuration settings properly collected and applied
- Remote host and credentials now correctly stored in config
- Non-interactive mode support for scripted installations
- Better handling of piped input for remote configuration
- Added debug output to help troubleshoot configuration issues
- Add logic to set input_remote based on TRANSMISSION_REMOTE from environment
- Add detailed debug logging for environment variables
- Ensure consistent behavior between direct mode and piped input
- Fix issue where environment variables weren't correctly propagating
This ensures that when remote mode is selected in install-script.sh, it's correctly respected in the main installer even when running in update mode.
- Save all piped input to a temporary file for sequential processing
- Read remote mode selection from first line of input
- Use remaining lines for remote Transmission configuration details
- Add proper handling of defaults for empty or missing values
- Improve debug output for configuration parameters
This allows users to pipe all configuration values to the installer in a single command, without requiring interactive prompt responses.
- Move Transmission remote details collection to install-script.sh
- Pass all remote details to main-installer.sh via environment file
- Avoid duplicate prompting for remote details
- Improve non-interactive mode with proper default values
- Add check in main-installer.sh to use provided remote details
This solves the problem where remote Transmission details were collected in install-script.sh but not properly used in the main installer when updating an existing installation.
- Add detection for non-interactive terminal (piped input)
- Properly read input from pipe in install-script.sh
- Use pre-set environment variables when available
- Add better fallbacks for script usage
- Fix syntax error in main installer script
- More detailed logging of input handling process
This ensures the installer can be used both interactively and in scripts/automated setups.
- Add debug logging to track input values
- Replace regex matching with direct string comparison for better reliability
- Add explicit checks for 'y' and 'Y' input values
- This fixes an issue where remote mode wasn't correctly detected from user input
This commit addresses an issue where the remote Transmission settings weren't properly applied when running in update mode:
1. Add prompt for remote Transmission details in update mode
2. Add code to modify the config.json file directly with the user's remote Transmission settings
3. Set default CONFIG_DIR and USER variables early in the script
4. Add detailed configuration dialog including:
- Remote host and port
- Username and password
- RPC path
- Directory mapping between remote and local paths
This ensures that users selecting remote Transmission mode will always be prompted for the connection details, even when updating an existing installation.
- Update version number in package.json to 2.0.5
- Add changelog entry for version 2.0.5 with recent fixes:
- Config file properly stored in /etc/transmission-rss-manager
- Fixed remote Transmission detection in install-script.sh
- Enhanced symlink handling between installation and config directories
- Better environment variable passing between install scripts
- Ensure CONFIG_DIR exists during installation
- Create proper symlink from INSTALL_DIR/config.json to CONFIG_DIR/config.json
- Use CONFIG_DIR instead of INSTALL_DIR for configuration files
- Add code to move existing config file to CONFIG_DIR if needed
This fixes the issue where the config.json file was not being created in /etc/transmission-rss-manager, even though the directory was created.
This commit addresses an issue where the Transmission remote setting wasn't properly preserved between install scripts.
Major changes:
- Fixed environment variable sharing between install-script.sh and main-installer.sh
- Added multiple methods to locate and load the .env.install file
- Removed duplicate log message in dependencies-module.sh
- Improved permission handling for the environment file
- Directly export TRANSMISSION_REMOTE variable before launching main-installer.sh
This ensures the user's choice of remote or local Transmission is correctly honored throughout the installation process.
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add direct prompt for remote Transmission as fallback in dependencies module
- Save choice to environment file for other scripts
- Add additional logging to show which path was taken
- Ensures remote transmission is always asked about, regardless of execution path
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Create .env.install file to store configuration choices
- Modify main-installer.sh to load environment variables
- Use direct sourcing to ensure environment variables are properly passed
- Add explicit logging of environment variable values
- Implement safer method of handling environment across script execution
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add direct remote Transmission prompt in install-script.sh
- Pass TRANSMISSION_REMOTE environment variable to main-installer.sh
- Add clarifying message when asking about installing Transmission daemon
- This fixes execution path when using install-script.sh instead of bootstrap-installer.sh
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Move the remote Transmission prompt to main installer before config module is called
- Modify config module to use the already-set TRANSMISSION_REMOTE variable
- Remove existing logic in config module that was causing issues
- Clean up environment variables when invoking installer from bootstrap
- Remove emergency fallback since we now handle it in the right order
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add emergency fallback to ask about remote Transmission if config step was skipped
- Add CONFIG_GATHERED flag to track if config step was run
- Improve bootstrap installer with clear explanation of what to expect
- Explicitly check for gather_configuration success and output debug info
- Add additional variable initialization to ensure consistent behavior
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Move SCRIPT_DIR initialization before its usage
- Ensure TRANSMISSION_REMOTE is initialized with default value
- Add logging to show whether remote or local Transmission is being used
- Initialize TRANSMISSION_REMOTE at the start of gather_configuration
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Fix bug where installer doesn't ask if Transmission is remote
- Fix missing configuration directory in /etc/transmission-rss-manager
- Create symlink between config locations to ensure app always finds config
- Ensure CONFIG_DIR is properly exported in the environment
- Update version to 2.0.4
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Changed config location to /etc/transmission-rss-manager/config.json
- Added fallback to maintain backward compatibility
- Updated installers to create and use the new location
- Added installPath property to configuration for updates
- Enhanced documentation with new config location
- Bumped version to 2.0.3
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Fix bug in dependencies-module.sh that would prompt to install transmission-daemon for remote installations
- Add checks for TRANSMISSION_REMOTE flag to correctly handle remote vs local installations
- Update version to 2.0.2
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add semver library for semantic version comparison
- Make package.json the single source of truth for version
- Add version check to only offer updates when remote version is higher
- Use APP_VERSION constant throughout server instead of hardcoded values
- Refactor update checking logic to use semver.gt() for proper comparison
This change improves robustness by ensuring updates are only
offered when a higher semantic version is available in the repository.
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Update version in server.js
- Update version in installer scripts
- Update version in utility modules
- Update version in file creator module
- Ensure consistent 2.0.0 version across codebase
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Enhance the version history in the About modal to match README.md
- Add categorized changes (Major, New, Improved, Fixed) for each version
- Format version entries for better readability
- Ensure consistency between About modal and README.md
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add v2.0.0 changelog with all new features and improvements
- Include historical entries for v1.2.0 and v1.0.0
- Format changelog with categories (Major, New, Improved, Fixed)
- Add release dates for each version
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add test mode for simulating available updates
- Implement a toggle to enable/disable test mode
- Add test parameter to check-updates endpoint
- Clean up debugging comments
- Create subtle testing UI controls
This enables testing the update functionality without needing
to create a new higher version in the repository.
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Create a comprehensive About modal showcasing features and version history
- Add information about PowerData.dk and Michael Bay-Laursen as the developer
- Include version history section for tracking changes
- Style modal for optimal display on all device sizes
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add system status card to dashboard with uptime and version display
- Implement version checking against git repository
- Add one-click update functionality
- Update footer and version references to 2.0.0
- Add server endpoints for status, update checking, and update application
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Bump version from 1.2.0 to 2.0.0
- Update repository URL
- Update README.md with new features and installation instructions
- Add documentation for web-based update system
- Update file structure documentation
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
